When it comes to enhancing your computer’s cooling system, Lian Li fans are a popular choice among PC lovers. These high-quality fans can significantly improve airflow within your computer case, keeping temperatures in check and enhancing overall system stability.
However, correctly connecting these fans to your motherboard ensures they work effectively. This guide will walk you through connecting Lian Li fans to your motherboard, ensuring you can harness their cooling power efficiently. Let’s start!
How To Connect Lian Li Fans To Motherboard?
If you’ve got Lian Li fans and are ready to set them up for optimal performance and lighting, here’s a step-by-step guide to ensure a smooth installation process.
When you unbox the box of Lian Li fans and take the fans in your hand, all you see is a chunky little connector connecting the middle of the fan. There are multiple protective stickers you see in the process of installation.
These stickers are on the fan center, side, and infinity mirror. Remember to remove all. Lian Li fans are different from others because these fans can be grouped up and connected quickly.
There are down clips on the side that slot together. One can quickly put them together in a group of four. There is a connector with a highlight you can easily slide that cover off and then lets you flip the direction of the cable.
![How To Connect Lian Li Fans To Motherboard?](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-226.png)
So, this connector only goes onto the fan in one way, so you can only attach it in one direction, but you can turn the cable and push the face another way. In your case, this is useful for the direction of the cabling, so it’s worth considering a position. It helps in cable management.
Traditional RGB fans are usually interconnected with daisy chain cables. But with Linan Li setup, you can easily connect fans in sequence. Simply slotting them together is simple; you line the notches up where they need to go, and you can get them the wrong way around.
Because the pins and the connection are designed, it’s impossible to put them together wrong, which is brilliant. You can see them connected up nicely now. I have groups of three now; with the three groups connected, you need to end that’s going to have a cable connection.
![Lian Li fan](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-227.png)
So it’s only at one end, so you can’t get it wrong, but again, remember that this will only go on in one direction. If you find, as I mentioned, it won’t go on, that’s because you have got it the wrong way around, so it’s a little bit fiddly initially to set up, but yes, it’s simple, too.
Some clips are on it, and the connection is necessary to power the cables. So this cable takes the fan’s power and RGB light and runs into your case to connect to your motherboard. Here is the point to change the wire’s direction according to the requirement.
![Lian Li fan](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-228.png)
You can quickly flip them if you need to make things neater. Use the correct position. We have three fans connected and interlocked, and there are two separate cables, one for RGB light and the other for power.
So, if you have the latest motherboard, you will get several system fan headers and RGB headers on the motherboard. It takes three pins and a five-voltage RGB header, so look for the marking for j rainbow in, usually for the marker or r g buoy b RGB. Assume it has five 5-vol markings next to it, so you want the three-pin connector, not the four pins.
![RGB Header](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-235.png)
You will often find the motherboard has a four-pin 12-volt connector, so obviously, you cannot plug the cable there; it only has slots for three pins, which will be impossible. Ensure you find a cis fan header on the motherboard and connect the power cable. Theoretically, there are multiple headers to connect a group of fans. Keep in mind the amount of power each one will put on, and ideally, you want to look for a PWM controllable header because that will give control over the fan speed.
![Lian Li fans](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-230.png)
Hare, you have to push the j rainbow connection; it is a bit fiddly, so carefully putting it in, it is easy to bend the pins on the motherboard from the link accidentally.
We have two groups of fans set up, so by connecting these cables at the bottom, you can see a fundamental level. With six single packs of fans, it is possible to connect up in groups onto your motherboard, So it is plausible to do that. What if you install more fans?
Then you have more than two J rainbow connections; however, you could get an RGB splitter cable. It is likely not included in your box, and you must purchase it separately.
Read Also: How Many SSD Can A Motherboard Support? – Unleash the SSD Potential 2023
That would allow you to loop the cables together, essentially daisy-chaining RGB from two groups of fans into one. The other alternative is to buy a triple pack. So the triple package comes with a control box that gives the power and RGB Lightening to groups of fans, and it can control up to 16SL 120 infinity fans in a group of four fans plugged in.
There are two additional headers at the top:
- Sync 1
- Sync 2
These can be used for RGB connection from something like the Galahad cooler, which is worth considering. It has two more Sata links, so you need to plug it into the power supply unit. It also has a micro USB cable plugged in to control the fan lighting Via L-connect, and that’s worth nothing. The difference is the control box. It contains the fan’s speed and lighting.
![Lian Li fan](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-231.png)
Now it’s time to connect with Lian Li fans. I’ll have three groups of fans, and I am joining each group with three different adapters of the three lovers. And then the single also connects to the control box, so every fan is now being plugged into the controller, and being controlled that way is a lot easier.
Now, use splitters and fan headers on your motherboard to power multiple fans, so when you have reached this stage, getting a triple pack makes life easier. If you bought two triple packs, you would have two controllers when you have loads of fans.
![Lian Li fans](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-232.png)
Now plug them all into the control box, so it’s essential to plug in USB header power. It would help if you had the juice to spin to tidy up all the cables and ensure everything is set up. It’s all and all, and now it’s just a case of downloading L-connect directly from Lian Li fans. If the fan is not working, just spinning, don’t panic. Update the software to get it running correctly. If you use RGB control directly from the motherboard, you will know to use your system software to customize RGB lighting.
Pro Tip😎:
The precise steps may vary based on the model of your motherboard and the type of Lian Li fans you possess. Always consult the user manuals of your motherboard and fans for complete installation instructions and compatibility information.
Is there Any Lian Li Fans Software?
![L-connect](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-233.png)
The L-Connect software makes it easy for users to control and change fan speed, color, brightness, and lighting effects.
How Does L-Connect 3 Work?
L-Connect lets you control lighting effects and make them fit your needs. It works with both the Strimer Plus and the Strimer Plus V2. Available for motherboards with 24 pins, GPUs with two 8-pins, and GPUs with three 8-pins.
Does Air Move Well Through The Lian Li O11?
With its two chambers and multiple fans, the O11 AIR can use all of its cooling power. It was made to push the limits of airflow. With its two compartments and various fans, the O11 AIR is ready to cool to its fullest potential.
Troubleshooting:
![Lian Li fans](https://www.motherboardfx.com/wp-content/uploads/2023/08/image-234.png)
Connecting Lian Li fans to your motherboard may encounter some common issues. Here are several troubleshooting suggestions:
- The fan is not turning. Verify that the fan’s power cable is securely attached to the motherboard.
- The lighting on the fan is not functioning. Solution: Verify the ARGB connection to the motherboard or RGB controller and ensure it is appropriately connected.
- The fan is making strange sounds. Solution: Verify that the mounting fasteners are correctly tightened. If the problem persists, reinstall the fan.
- The pace of the fan cannot be adjusted. Confirm that the fan is correctly connected to the PWM interface on the motherboard. Check the BIOS settings for options regarding fan control.
Conclusion:
Connecting Lian Li fans to your CPU is simple and can significantly affect how well your PC cools. By following this guide, you’ll ensure your fans work right, improving your system’s performance and making it more comfortable to use. Remember to take safety steps and fix any problems that come up. Now, go ahead and use your Lian Li fans to their fullest
FAQs:
Q1. Can you plug a fan into an AIO port?
An AIO pump is a CPU air cooler fan. You could use fan connections more than once if you needed to.
Q2: Can I put a fan into the motherboard’s RGB header?
The right cable makes it easy to connect 4-pin RGB fans in just a few simple steps. First, you need an RGB fan with a 4-pin connector that will fit into the header on your processor or controller.
Q3. Can a 3-pin go in a 4-pin?
A case fan with three pins can easily connect to a motherboard plug with four pins. In this setup, the fourth pin is just left empty. It will run at a set speed most of the time without being controlled.
Q4: Can RGB fans be used without an RGB header?
Even if you don’t plug in the RGB part, they will still work as fans. Most RGB fans come with a controller or need one to be put in so that software can control them.
Q5. How Long Does Lian Li’s Fan Last?
The Lian Li Galahad pump lasts 70,000 hours, and the fans last 40,000.