To light up modern spaces, LED lights have become a popular choice. Energy efficiency and several colors are available. LED lights sometimes display the wrong colors. This can be frustrating, but we have several easy solutions to restore your vibrant colors.
First, we will talk about why my LED lights flash different colors.
Why are my LED lights flashing different colors? 4 basic reasons!
The most common reason LED lights show different colors is that the power source isn’t working right. If there isn’t enough power, the voltages can be different, or the links can be wrong. LED lights can show up in different colors.
![Why are my LED lights flashing different colors?](https://www.motherboardfx.com/wp-content/uploads/2023/10/image-28.png)
LED lights are very bright and need a lot of power to work. Like, a short line of ten LED lights takes 600mA of power. That is, 0.6 watts per volt. You’ll need a vital power source to run multiple strips. The strips can get very hot if you don’t handle the power properly.
LED lights need to get rid of heat properly because they have a lot of parts. LEDs are made to stay cool but can still get too hot since the temperature is relative.
Most of the LED lights we buy come with tape that you can use to stick them on walls, shelves, and other surfaces. This adhesive tape has cooling qualities.
But this feature is usually only found on high-end LED strips made by reputable companies. Because the particles in the tape block some of the heat from the strip, the sensitive lights are less likely to burn out.
Keep reading: Is Asus Motherboard Better Than Gigabyte? Asus vs Gigabyte 2023
Most of the time, LED light strips are made with safety features that keep them from getting too hot. It helps the conductive elements cool down because the aluminum case inside the strip works as a heat sink.
It’s better to spend a little more on a high-quality product than to buy new LED lights later on because they will last longer if you take care of them.
1. Overheating LED Strips:
Their placement is a big part of how long the LED light strips last. LED lights must be put on a surface that lets air flow easily. Like under kitchen shelves, around bed frames, or on furniture. Wood keeps heat in and acts as insulation, which makes it easy for the LED lights to get too hot.
Surfaces made of metal or clay are better because they naturally get rid of heat. Not a good idea is to be in places that are too hot or tight, like near stoves or electronics.
Note: If the material that the LEDs are fixed on doesn’t let them cool down enough, their temperature can rise.
2. Loss of voltage:
A voltage drop can happen for a bad link or a changing mains current. Or, more likely, an LED strip that needed to be put together better because the power drops as it goes along the length of the strip. This means the power drops by one for every foot of the LED strip as it goes along its length. If the power drops, the light might change color or get brighter on one end than the other.
3. Poorly Color-Matched LEDs:
The less expensive the LED lights, the more likely the colors won’t work right. LED products in the middle price band tend to break down quickly, and the technology stops working after too much use.
The epoxy covering breaks down because these lights give off heat and UV light. So, you’ll see that the encapsulant changes color to yellow or brown, changing the color of your LED lights.
Again, it’s best to buy LED light strips from a well-known brand that are the best ones you can afford.
4. Paint or glue on LEDs:(it happens sometimes)
It can be too much work to take down and back up your LED setup when it’s time to paint your room. Well, it’s common for paint or other materials to get on the LED strip during repairs. This can cause the LED units to look dull, faded, or a different color.
The best hint is to ensure the LED lights stay clean and remove them if needed. Paint getting inside the wires is the worst thing that could happen. Flickering, a lack of light, damage, color changes, or the lights could stop working and be replaced.
5. Bad Link:
If your lights are blinking or flashing constantly, it could be because of a bad connection. This means that the wires that connect the LED strips aren’t hooked up right, which is why your lights aren’t working. This disturbance stops the current, so ensure that none of the parts are free. You should either solder any connections that aren’t tight or cut them out and put LED strip connectors back on them.
Read also: Where do today’s computers store almost all motherboard configuration data?
Why are some of your LED lights a yellow color?
If you see that, one part of your LED lights might differ. This could be because of the power. Power from two ends of the strip that are not connected is best. Your lights might not be the right color because of a broken or damaged link. One failed LED chip can make the whole light strip not work, which is very annoying.
![Why are some of your LED lights a different color?](https://www.motherboardfx.com/wp-content/uploads/2023/10/image-29.png)
Problems with the LED strip circuit:
To figure out what’s wrong with your LED strip, you can start by troubleshooting and going through the colors:
- Turn on your LED strip
- Go from one color to the next one by one. Red, Blue, Green, Yellow, etc., and make sure that the chosen color lights up the whole strip.
- If any color doesn’t go across the strip, look it over to see if there is any damage and fix it or replace it.
At that point, the best thing to do would be to use your iron and contact pad to sell it, linking. Because your safety is essential, remember to turn off the LED. You won’t have to worry about getting shocked again when you move on to the next steps.
If some parts of the LED strip don’t light up and stay dark, that could mean an open circuit or a problem with how it was made. Also, it could mean mechanical damage during shipping or setup. Or, the LEDs or parts of the LEDs in a single area have come loose, which has caused an electrical problem.
To get a new one, you can ask your provider to see if they offer any warranties. You could also cut along the marked lines to eliminate the failed section. Then, you use adapter clips to put the strip lights back together. Do not cut any light strips that do not have the lines or other signs that they can be cut. If you do, you could ruin your new buy.
Also read: How Much It Cost To Replace Motherboard On Laptop? A Pro Guide 2023
How to fix LED lights when the colors are wrong? 5 Pro solutions
We now know your LED light strips could be different colors for many reasons. Here are some more reasons you might have an LED headache and how to fix it.
![how to fix LED lights when the colors are wrong?](https://www.motherboardfx.com/wp-content/uploads/2023/10/image-30.png)
1. Verify the power supply: Pay attention to all the steps!
Having trouble with the power source is the most common reason LED lights show different colors. If there is enough power, the voltages can be different, or the links can be good. LED lights can show up in different colors.
Here are some things you should check if you think the power source is the issue:
- Make sure the LED system is wired correctly.
LED lights can also show different colors if the wiring isn’t right. Check to see that all of the wires are correctly attached and locked in place. Consider hiring an electrician to help you if you need to learn how to check or replace your lights.
When you check your LED lights’ wires, here are some things to keep in mind:
- State of the Wiring
Check the wiring for damage, like frayed lines or sticking out. As we already said, voltage drops can happen when a wire is damaged, making LED lights show different colors.
- Connecting the wires:
Make sure that all of the wire links are tight and safe. Voltage drops can happen when links aren’t closed, making LED lights show different colors. This is very important if you have more than one strip.
- Setting up the wiring:
Check to see that the wiring is set up properly. LED lights can show different colors or not work if the wiring needs to be done right.
LED systems can get messed up or have program bugs that make the LEDs show different colors occasionally. LEDs with different colors can be fixed by returning the lighting system to its original settings.
Following the manufacturer’s directions if you want to reset an LED system. In general, though, the steps are these:
- Cutting the power to the LED system off.
- Find the control module’s reset button or switch.
- Hold down the reset button or switch for a few seconds.
- Putting the power back on and checking the LED lights to see if the problem is still there.
Remember that if you reset the LED system, it will lose any choices or programming that you have made along the way. You should try one of the other ideas on our list if you don’t want that.
If resetting the system doesn’t fix the problem, there may be a physical issue with the LED system, like broken sensitive diodes or an RGB strip connector that doesn’t work right.
Voltage:
For LED lights to work right, they usually need a specific power. Check your LED lights’ energy and ensure they get the right amount of power from your power source. Fix voltage drops to make LEDs show the correct colors again.
2. Fixing Different LED Light Colors by Replacing Broken Bulbs:
If none of the above fixes the issue, it might be time to switch out the LED lights. Individually check each bulb to see which ones aren’t working right and replace them with new ones.
But when you buy new lights, make sure they work with the old ones, are of the same quality, and can be powered by the same source. This is to ensure that the strip’s brightness is even, that it works right, and that it doesn’t give you any problems in the future.
3. Setting up your LED light strip again:
You still need to do the old factory restart because you want to keep your custom sequences. You often need to find your unique settings if your LEDs need to show the right colors.
I understand this is a bad idea, but I would not recommend it if I knew it was one of the best ways to fix the problem.
As you change the settings on your LED lights over time, they may pick up bugs that cause them to act in strange ways, like choosing their colors.
When you do a factory restart, all of your changes are erased. If your LEDs showed the right colors when you first set them up, they would be after the reset.
4. LED Strip Lights Not Matching Factory Color:
Checking the quality of color-matching LEDs is an integral part of making them. Cheap makers, on the other hand, often skip this step, which leads to LEDs that need to match colors better.
If the problem was there when the product was first made, it was probably caused by a production or quality control mistake.
5. Mounting Surface Damage: Must Try Mentioned steps!
This usually happens when one or a few LEDs are a slightly different color from the rest of the strip. This is because the diode’s foot on the strip has come loose.
To fix a single diode is almost impossible. It is better to remove the LED part and install a new one. You can use LED strip connectors or solder in a new piece.
Reset methods vary from LED strip to LED strip and brand to brand. However, I can give you some general tips that work for most LED strips.
- Some strips may need you to press and hold the power button, while others will have a restart button on the receiver.
- For more complicated gadgets, you might need to disconnect and then reconnect the power supply.
- If the reset button isn’t clear, it’s a good idea to look it up on the manufacturer’s website instead of throwing things around like a crazy scientist for hours.
Last but not least:
It might seem hard to fix LED lights that are the wrong color, but it’s usually just a matter of fixing and maintenance. You can get your LED lights to show accurate and bright colors again by checking the connections, power source, settings, and control devices. Remember that you can always get help from a professional if you need help figuring out what’s wrong. Have fun with all the colors that LED lights can give you.
FAQs:
Q1. Can LED lights change the colors they’re set to?
The RGB color model and advanced electrical control allow LED lights to change color. The primary colors used in additive color mixing are Red, Green, and Blue, which RGB stands for. Different colors can be made by mixing different red, green, and blue light levels.
Q2. What’s wrong with my LED lights?
The heat and UV light the LED gives off while it works is bad for the phosphor. The phosphor and its parts break down over time because of these two forces.